The Ultimate Guide to Garage Door Installation

A brand-new garage door is the most significant part of your residential and commercial properties. It effectively enhances your home’s safety and security and gives it an elegant touch. Thus, a garage door installation in Boulder allows several homeowners to sleep fearlessly. If your garage door eventually stops working, it’s better to replace it with a new one, and to do it with perfection, a complete understanding of the installation process is a must. This blog demonstrates the best methodologies and steps for Garage door installation.   

Tools Required 

To perform residential garage door installation in Boulder, you need a set of equipment, and here is a complete overview of that: 

• Wrench set 
• Lock pins
• Drill
• Step ladder
• Safety glasses 
• 4-foot level

Main Supplies 

• A brand new garage door 
• Steel cables
• Garage door springs
• Inch 3 screws
• Weatherstripping 
• Shims 
• S-hook 

Safety Measures to Take Before Installation Process

You should be clear about the installation, follow the safety measures carefully, and perform garage door installation in Boulder hassle-free. 

Step 1. Measure and choose 

Measure the opening where the garage door will be in place before making your choice. Then, pick a relevant garage door design that suits your preferences & the Architectural style of your home. 

Step 2. Clear the area

Remove the old garage door if necessary, and ensure the space around the door opening is clear of any impediments.

Step 3. Safety gear 

Protect your safety by equipping yourself with suitable protective equipment such as gloves and safety glasses. Gather any installation-related equipment and supplies as well.

Points to Consider for Installing Garage Door Installation

Perform the below-mentioned steps to perform Garage door installation rapidly:  

Point 1. Remove the old garage door 

If you possess a garage door, use pliers, screwdrivers, or a drill to remove it and any pieces that come with it. Disconnect all hangers, pulleys, guide tracks, rollers, cables, springs, and pulleys. 

Point 2. Link the weather stripping to the door

Rubber weather stripping should be installed on the bottom of your new garage door for insulation. Just slide or push the weather stripping along the bottom of the garage door until it completely covers the bottom to install it.

Point 3. Mount brackets onto the garage door

In the next move, your garage door technician install two brackets on both corners of the base of your garage door. Such brackets attach to the cables to permit the door to open upside and close downside. Place the brackets over the weather stripping and attach them with a screwdriver. 

Point 4. Install the hinges onto the garage door 

Your door’s hinges keep the panels together, allowing the door to move. Using your drill, install the hinges on the top of your panels. The hinges on your garage door panels should be installed at the top center and corners. 

Point 5. Insert rollers into the bottom of the garage door 

After installing hinges and tracks to the garage door, there is time to install the rollers directly to the bottom. 

Point 6. Link the first garage door panel 

The first and last panels in your garage door installation require different installation techniques than the others. You’ll need the assistance of a friend to center the panels and pull them into place. Shims and a leveler will also be required to keep the door level as you work. Place shims under the panel to level it out if one side is uneven. Fit the first panel into the roller track, ensuring it’s securely in place. 

Point 7. Install the remaining components of the door 

Now install the remaining components of the door, i.e., rollers, tracks, and others. Use your drill machine to fix the inch 3 hinges, screws carefully. 

Point 8. Connect the vertical track to the horizontal 

The following step is to join the two sections of the track. Before installing the final panel, this must be done to avoid collapsing while you adjust and install it. Screw the horizontal piece of the track into the vertical section with a ratchet wrench and lag screws to do this.

Point 9. Install the final panel 

Attach the final panel like in step eight after your track is in place. Line up the panel against the panel behind it, secure it to the brackets on the panel beneath it, and then install the hinges and rollers.

Point 10. Link the garage door springs 

Connect the spring’s end to the hook at the end of the track. Push the door up with your assistant until it moves up the track. 

Conclusion 

That’s it from this blog, as we have elaborated a complete garage door installation process in a detailed manner. If you want satisfactory installation services, consult with the technical experts of Garage Door Repair Boulder.