Things to Keep in Mind When Doing Garage Door Spring Replacement

When your garage door spring works well, you usually don’t give it much thought. You can only share your garage door with much thought once it suddenly won’t open or your car won’t start.

In this case, you can independently call an expert or attempt garage door spring replacement. A professional spring repair costs $200 to $300, but you can save $300 by doing it yourself. You shouldn’t risk replacing the spring to save money if you’re not a handyman.

The following tips are for DIYers and those who want more information before calling or visiting the hardware store.

What Varieties of Springs Are There for Garage Doors?

Garage door spring replacement begins with familiarity with the various spring configurations that make up your door. Torsion springs and extension springs are the two most common kinds of springs. Each one contributes in its own way to the smooth running of your garage. 

Torsion Springs

Torsion springs are the most common in most garage door systems. These springs are torque providers and are installed directly above your garage doors. 

A winding cone attaches the torsion springs to the winding bars, while a stationary cone secures the opposite end of the springs. Torsion springs, which twist as the door opens and closes, are standard on most garage doors. 

When the garage door is shut, a lot of force is applied to the springs holding it together. The garage door’s torsion springs receive this energy and use it to raise the hefty door. 

Extension Springs

Both extension springs with your garage door opener should be mounted above the door’s tracks. They have safety cables that attach them to the garage door’s bottom corners. 

Extension springs stretch and return to full extension when the door closes. Pressing the button releases energy and opens the door. 

Extension springs are thus constantly in their fully stretched position. This results in faster wear and more frequent replacement than with torsion springs. 

Torsion springs last 15,000–20,000 cycles, while extension springs last 10,000. The average lifespan of a garage door spring predicts when it will break and need to be replaced.

When to Replace Torsion Springs in Garage Doors

Properly maintained torsion springs are essential for the stability of your garage door. The force required to open and close your door should be comparable. 

To inspect the torsion springs, disconnect the garage door opener and lift the door manually. When the door is opened, it should stay that way without further aid from the opener. The garage door springs must be replaced if the door can’t be raised fully.

Check the torsion springs by raising the door halfway. In the absence of damage or a loss of tension in the springs, it should remain in place. Broken garage door spring is a common cause of garage doors that are difficult to open and close.

When to Replace the Extension Springs on Your Garage Door

Some indications of extension spring failure differ from those of torsion spring failure, but the two types of failure are similar in many ways.

Check the coils visually for damage before the garage door spring replacement process. Because the steel has worn out, the springs cannot raise the door.

The right and left sides of the garage door should be level. A broken door spring prevents opening and closing.

Finally, look for deterioration in the springs’ clips and loops. If any of these parts break, the spring will be useless.

Conclusion

Garage Door Repair Boulder Colorado can replace your broken garage door spring. We can repair both extension and torsion springs. Our mission is to provide first-rate services for installing and replacing door springs. You can find us by searching the option garage door services near me.